In Motion - Channel 1
PTI barrier test
to air on WPSU
Watch video now

In Motion - Channel 2
150th anniversary
time capsule video
Watch video now

In Motion - Channel 3
Calvin H. Waller,
first African-American
Penn State graduate
Watch video now



On the Air

Listen to WPSU-FM
Penn State's NPR and PRI affiliate public broadcasting station

Listen to ComRadio
AP News feed, College of Communications programming








Text only
 Recent Headlines
Optical wireless and broadband over power lines: A high speed alternative
Tuesday, January 10, 2006

University Park, Pa. -- Penn State engineers have shown that a white-LED system for lighting and high data-rate indoor wireless communications, coupled with broadband over either medium- or low-voltage power line grids (BPL), can offer transmission capacities that exceed DSL or cable and are more secure than RF.

Colored LEDs or light emitting diodes currently are found in the numbers on digital clocks, remote controls, traffic lights and other applications. Recently, white LEDs have emerged in the market and the tiny white lights are being considered as replacements for incandescent and fluorescent bulbs.

Some researchers predict that by 2012, tiny white LEDs will deliver light brighter than a 60 watt-bulb, yet draw only as much current as provided by four D-size batteries. A Japanese team recently suggested using white LEDs not only for lighting but also as light sources for wireless in-house communications.

Now, Mohsen Kavehrad, the W.L. Weiss professor of electrical engineering and director of the Center for Information and Communications Technology Research, and his team have shown that, in the system they designed, coupling white LEDs to BPL can deliver secure, wireless bit rates of a gigabit per second, a rate exceeded only by fiber.

Kavehrad detailed the Penn State system and its performance in simulation in a paper, "Hybrid MV-LV Power Lines and White Light Emitting Diodes for Triple-Play Broadband Access Communications," at the IEEE Consumer Communications and Networking Conference in Las Vegas on Tuesday, Jan. 10. His co-author is Pouyan Amirshahi, a doctoral candidate in electrical engineering.

In the Penn State system, white LEDs are positioned so that the room is lit as uniformly as possible. Since the LEDs are plugged into the room's electrical system, broadband data, voice or video delivered via the power lines can piggyback on the light that fills the room to reach any wireless-receiving devices present.

Since light does not penetrate walls, as do the microwaves used in RF, the white LED system is more secure. In addition, there are no known health hazards associated with exposure to LED light.

"Optical path differences can cause signal distortion in high-speed data transmission," said Kavehrad. "This distortion is highly dependent on the room's dimensions and system configuration. However, if a system is designed appropriately, this distortion can be minimized. For example, in our proposed system, at worst, distortion limits the data rate to one gigabit."

Although white LEDs are not yet commercially available for this type of application, Kavehrad is confident that they will be. "White LEDs are not there yet but by 2010, they will be available and economical," he said. "Their low-energy consumption will make them especially attractive. In the future, when you turn on the lights for indoor low-cost lighting, you could receive broadband via the same white-light LED."

The study was supported through Penn State's Center for Information and Communications Technology Research.



Contact
  Barbara Hale
  bah@psu.edu
  http://live.psu.edu
  814-865-9481

Contact
  Vicki Fong
  vfong@psu.edu
  http://live.psu.edu
  814-865-9481
The Pennsylvania State University  2006 Penn State: Making Life Better Have a question? See our list of contacts.